

中文

PRODUCT CENTER

All categories



Number of views:

1000

Voltage regulator thick film circuit

Retail price

0.0

元

Market price

0.0

元

Ceramic thick film circuit boards specially designed for various automobile and motorcycle igniters. These products are suitable for various automobile and motorcycle ignition systems. They are ideal ceramic circuit boards for electronic igniter control modules. They have good reliability and longevity. It has the advantages of long, stable use, convenient installation and welding.

产品编号:

Cate

Ceramic thick film

range of working temperature:

-40℃～+125℃

Substrate material:

96% AL2O3 ceramic substrate

Conductor material:

Ag/Pd, strong conductor adhesion

Resistance material:

High-performance conductive material, stable resistance, low TCR value

数量：

Stock:



Product description

Table Parameter

1. Product introduction:

2. Product features:

1. Reliable performance, stable input and output characteristics, high precision, low TCR, etc.

2. Provide a stable basic circuit for motors with strict voltage regulation characteristics, with an accuracy of 0.5%

3. It has excellent heat dissipation performance and is suitable for use in the harsh environment of 14 ~ 28V model generators

4. Long service life, good consistency, can be used for various types of imported and domestic generator regulators

5. Good solderability and solder resistance, suitable for high-speed SMT patch processes such as reflow soldering

3. Product features:

1. Operating temperature range: -40℃～+125℃

2. Substrate material: 96% AL2O3 ceramic substrate

3. Conductor material: Ag/Pd, strong conductor adhesion

4. Resistance material: high-performance conductive material, stable resistance, low TCR value

5. Welding ability: the resistance change is less than 0.5% (265 ℃ soldering furnace, immersed in 10s, repeated 5 times to test the electric

Resistance change rate)

Scan the QR code to read on your phone

project	specification
Resistance range	0.2Ω ～10M Ω
Resistance tolerance	Minimum ±0.5%
Temperature Coefficient of Resistance	0.2Ω≤R<100Ω 1MΩ<R≤10MΩ	±500PPM /℃
Temperature Coefficient of Resistance	100 Ω≤R≤1MΩ	±250PPM /℃
Insulation resistance	1000MΩ	Apply a 100V DC voltage between the substrate and the electrode , and test the insulation resistance value after 1 minute of electrification

Solderability	Weldable area is greater than 95%	Dip the product into the inactive flux for about 2s , then remove the excess flux, immerse the product into the solder bath to a depth of 10mm , the solder bath temperature is 240℃±5℃ , the immersion time is 3s ±1 s , and the resistor is cleaned with solvent Flux residues on the film , observed under a magnifying glass of 10 times
Resistance to welding heat	No visible damage △R≤±(1%R+0.05Ω)	Immerse the component into the solder tank to a depth of 10mm , the temperature in the solder tank is 270℃±5℃ , the immersion time is 10s ±1 s , and place it at room temperature for 1 to 2 hours. Clean the excess flux with a solvent, and then measure the resistance value
Rapid temperature change	No visible damage △R≤±(1%R+0.05Ω)	Normal temperature (2 to 3 minutes ) -55°C±3°C for 30 minutes 125°C±3°C for 30 minutes Normal temperature (2 to 3 minutes ) , after 5 consecutive cycles from low temperature to high temperature , the component recovers for more than 1 hour under standard atmospheric conditions , Within 2 hours, measure the resistance value
Steady state damp heat	No visible damage △R≤±(3%R+0.1Ω)	The component is maintained for 1000 hours in a humid heat test box with a temperature of 40℃±2℃ and a humidity of 90% to 95%
Solvent resistance	No visible damage	Dissolving solution: trichloroethylene, immersed in 10H±1H
Storage conditions	Temperature: 5℃ ～35℃ , relative humidity: 45% ～70%RH Avoid storing in corrosive gas environment

None

Throttle sensor thick film circuit

Home 丨 About Us 丨 Product 丨 News 丨 Equipment 丨 Online Message 丨 Contact Us

CONTACT US

Tel：0512-36831028

Mailbox：ba03@favorstar.com.cn

Address：No. 99 Mingtong Road, Zhouzhuang Town, Kunshan City, Suzhou, Jiangsu Province

Voltage regulator thick film circuit

CONTACT US

We contact you

联系信息